Same barbells, same metres of floor, same class times. Two boxes can share all of that and still produce very different athletes after a year. What separates them is the plan on the whiteboard: which qualities are trained on which day, in which order and with which format. That plan is what makes CrossFit training a method rather than a random hour of hard work.
New to the sport? Start with what CrossFit means, which covers the basics of the method and a typical class. This article focuses on the plan itself: how one session is built, what the main WOD formats are, how the week is organised, how to scale a workout correctly and what each format needs from the room and from the artificial turf for the box.

01Start with the stimulus
The first question in any session is not "which exercises?" but "what should this session train?". Short, explosive power, long endurance and maximal strength each need a different session. Once the coach has chosen, the rest follows in order: the goal defines the format, the format defines the movements, and the movements define the warm-up.
This target is called the stimulus. One WOD (workout of the day) can be a four-minute sprint or a twenty-minute grind, depending only on the load and the pace. The coach writes it with one of the two in mind. An athlete who turns it into the other has trained something else.
Four blocks in one hour
A standard class lasts 60 minutes and has four blocks. Their length can vary; their purpose does not. Each block prepares the next one.
- Warm-up, 10–15 minutes. Specific to the day. It mobilises the joints and practises the coming movements with a light load. Thrusters in the WOD mean front squats and presses in the warm-up.
- Skill or strength, 15–20 minutes. A heavy lift in low-rep sets, or practice of a technical movement: a snatch, a muscle-up, a handstand. It sits early in the class, because technique and near-maximal loads need a fresh body.
- WOD, 5–20 minutes. The intense block, with a set format and a target duration. It often repeats a pattern from the previous block, but lighter and faster.
- Cool-down, 5–10 minutes. Mobility, stretching and recording the result. Today's score is the reference for next month.
One rule never changes: technical work first, metabolic work second. Snatches after a burpee WOD are a bad combination, even with time to spare.
02Six WOD formats and what each one trains
The format decides how the work is counted: by time, by rounds or by minutes. With identical movements, two formats can produce two very different sessions. These six cover almost every whiteboard.
AMRAP and EMOM
AMRAP means As Many Rounds (or Reps) As Possible. The time is fixed and the score is the amount of work completed within it. The best-known example is "Cindy": 20 minutes of 5 pull-ups, 10 push-ups and 15 air squats, repeated for as many rounds as possible.
- Trains: a steady, sustainable pace. A fast start usually means a collapse around minute six.
- Duration: normally 5 to 20 minutes.
- Score: full rounds plus extra reps. "12 + 8" means twelve rounds and eight reps of the next round.
EMOM means Every Minute On the Minute. A task starts at the beginning of each minute, and the remaining seconds are rest. Example: 12 minutes alternating 12 kettlebell swings in odd minutes and 10 burpees in even minutes.
- Trains: movement quality under controlled fatigue. Rest is part of the format, so it also works for skill practice and lighter strength sets.
- Rule: a task should take no more than 40–45 seconds. Longer than that, the rest disappears and the session becomes a different workout.
- Variants: E2MOM and E3MOM, every two or three minutes, for longer or heavier tasks.
For examples you can try without equipment, see our selection of WODs to do at home.

For Time and Tabata
For Time is the opposite of AMRAP. The work is fixed and the score is the time needed to finish it. Most For Time workouts have a time cap: if it runs out, the score is the number of reps completed. "Helen" is a typical example: 3 rounds of a 400 m run, 21 kettlebell swings and 12 pull-ups.
- Trains: managing effort towards a visible finish. Fast, without stopping.
- Variant: RFT (Rounds For Time), a fixed number of rounds against the clock.
Tabata is an interval protocol: 20 seconds of maximal work and 10 seconds of rest, eight times in a row, for four minutes in total. It comes from a 1990s study by the Japanese researcher Izumi Tabata. In the box it is used with simple movements such as air squats, rowing, the bike and burpees.
- Trains: pure anaerobic power. The four minutes feel much longer.
- Score: the weakest of the eight rounds, or the total number of reps. Scoring the weakest round penalises a start that is too fast.
- Limit: it does not suit technical lifts or heavy loads. After 20 seconds at maximal effort, technique breaks down.
Chipper and ladder
A chipper is a long list of exercises with high reps, done once from top to bottom. The athlete "chips away" at the list until it is finished. The classic is "Filthy Fifty": ten exercises, fifty reps each, for time.
- Trains: long endurance and mental resilience. It can take 20 to 40 minutes.
- Needs: a lot of equipment set up at the same time and space to move between stations.
A ladder changes the reps each round, upwards (1-2-3-4-5…) or downwards (10-9-8…1). It can be for time or within a fixed window, until a rung can no longer be completed.
- Trains: coping with a growing workload. The first rounds are misleading; the last ones are the real training.
- Common variant: 21-15-9, a three-round descending ladder. It is the rep scheme of "Fran".
03Planning the week
A single session is not a programme. The real structure appears over the week: what repeats, what does not and where the rest days fall. CrossFit is built on variety, but variety is not chance. A good week distributes the three movement groups — weightlifting, gymnastics and monostructural conditioning — and mixes short, medium and long efforts.
Training and recovery
The original template of the method was three days of training and one day of rest. Today most boxes open five or six days a week, and each athlete chooses how often to train. A reasonable guide:
- Beginners: 3 sessions per week, with rest days in between.
- Intermediate athletes: 4 to 5 sessions, never more than three days in a row.
- Competitive athletes: more volume, sometimes two sessions a day, with planned deload weeks.
In a box, the plan must work for members who train Monday, Wednesday and Friday, and equally for those who come on Tuesday and Thursday. This is why the same pattern is not repeated on consecutive days: a squat-heavy Monday is followed by pulling or running on Tuesday.
Effort duration also rotates. A short WOD under five minutes, a medium one of 8 to 15 minutes and a long one over 20 minutes train different things and create different fatigue. Ten minutes at full intensity every day leaves the body with only one gear.
Placing maximal strength
Maximal strength goes where the body is most rested: usually the first or second day after a rest day. Within the session, it always comes before the WOD.
The work is short sets of 1 to 5 reps, long rest periods and precise technique. A squat record attempt the day after a forty-minute chipper makes no sense, and neither does a heavy 5×3 after a burpee Tabata. It is not needed every day either: two or three strength blocks per week, rotating legs, pulling and pushing, are enough for most box programmes.
Which lifts to choose and how to progress each one is a separate topic, covered in the best strength exercises in CrossFit.

04Scaling: same stimulus, different load
Scaling means adapting the WOD to each athlete's level. It allows a beginner and a competitor to train in the same class. The principle is simple: scale to keep the stimulus, not to make the session easier.
If a WOD is designed to last five to seven minutes, the scaled version should last the same. If the prescribed load turns it into a twenty-minute effort, the athlete has not done the same workout with more effort, but a different workout. So only the necessary variable changes:
- Load: fewer kilos on the barbell or a lighter kettlebell.
- Reps: less total volume, same structure.
- Movement: a variation of the same pattern. A banded pull-up instead of a strict pull-up, a pike push-up instead of a handstand push-up.
The key question is what the WOD was designed for. If it was speed, scale to stay fast. If it was strength, reduce the volume before the load. Scaled versions for every movement group are in our CrossFit exercises list.
05Space and surface for each format
Formats differ in fatigue, and they also differ in how they use the room. Solving that is the task of whoever designs the box.
- EMOM and strength blocks: each athlete at a fixed station with a barbell or kettlebell. The room needs stations for the full class at once, and thick rubber where bars are dropped.
- AMRAP and For Time: mixed movements, transitions between stations and often running or sled work. They need clear walkways and a route that does not cross the lifting area.
- Tabata and intervals: the whole group stays in place for burpees, jumps, mountain climbers or air squats. Hands, knees and backs touch the floor the whole time.
- Chipper: a little of everything, all at once. Ten stations ready and a lane for the running or sled part.
Two zones appear in every format. The lifting zone, on rubber that absorbs dropped plates. And the functional zone, used for burpees, jumps, swings, sprints and the sled: this is where the artificial turf for the box fits. It has 86,000 stitches/m² and a short, non-directional pile, so grip is identical in every direction, the sled slides with constant resistance and the surface does not form waves or folds with daily use. It is produced in widths from 1 to 2 metres and lengths from 5 to 16 metres, with lane markings and the box logo on request.
The floor area for each zone and the height each movement requires are explained in our article on CrossFit box size.

06Summary
CrossFit training starts with the stimulus: what should today's session develop? That choice defines the format, and the format defines the movements. A class has four connected blocks, from technical to metabolic. Each format measures work in its own way: AMRAP fixes the time, For Time fixes the work, EMOM puts a clock on every minute, Tabata is four minutes of intervals, and the chipper and ladder extend the effort. The week distributes movement groups, effort durations and rest, with maximal strength when the body is fresh. And scaling keeps the stimulus intact instead of reducing it.
For more on the topic, visit the CrossFit and Hyrox blog.
Designing a box and want a layout that works with any format on the whiteboard? Tell us about your project and we will help you plan the zones.



